MISCELLANEOUS
|
Kickstand Stop for Big Twins
This chrome-plated 5/16"-thick steel Kickstand Stop protects the primary case cover from the kickstand. Eliminates the need for the glue-on fall-off rubber pad. Nylon- tipped stainless steel set screw provdes adjustment for proper kickstand position. Fits all 1958-84 FL and FX models with stock leg bracket #50014-74 (except FXWG) and 1989-99 FL and FX models with stock leg bracket #50018-85. Made in the USA (beware of imported copies that may slip and allow your bike to tip over).
-240210 Kickstand Stop M.S.L. $21.99
|
|
Chrome License Frames with Lined Lenses
These exclusive Khrome Werks® frames are made of ABS with acrylic lenses and feature a silk-screened line design. Available with or without border to accept plates up to 4.9" x 8.2" (larger plates may be trimmed to fit). Frame with border features a clear viewing area of 3.7" x 6.7". Made in the USA.
-720160 Chrome w/lined lens M.S.L. 32.95
-720170 Chrome w/lined lens and border M.S.L. 32.95
|
Chrome Carb Top for CV
Chrome-plated, die-cast aluminum top cover for CV Carburetors on Sportsters 1988-2006, all Big Twin models 1990-2006 and Screamin'Eagle 44mm CV Carbs. Made in Taiwan.
-373500 Carb top cover M.S.L. $17.69
Taillight Visor for H-D
This easy to install Chrome-plated steel light visor fits all Harleys 73-08 except models with "Bob-tail" fenders. Made in the USA.
-720078 Taillight visor M.S.L. $14.95
Lower Front Fender Trim For FL, FLST
Chrome plated steel trim contours the OEM fender of FL models and mounts using the stock aluminum trim mounting location. Chrome mounting hardware included. 380093 replaces OEM #59233-76, 380094 replaces OEM #59231-86, and 380092 replaces OEM #59235-86. Made in the USA.
-380093 Fender trim, 58-85 FLH, FLT M.S.L. $25.79
-380094 Fender trim, 86-08 FLT M.S.L. $25.79
-380092 Fender trim, 86-08 FLST M.S.L. $25.79
Die-Cast Turn Signal Visor for FLT, FLST, FXRT
Chrome plated die cast zinc visor for the turn signals on 1986-up FLT, FLST and FXRT Harley models. Mounts between the OEM light housing and the lens; O-rings provided to seal out water, dust, etc. Longer screws provded; sold in pairs. Made in Taiwan.
-720095 Turn signal visor (pr.) M.S.L. $22.99
Chrome Carburetor/Air Cleaner Brackets
Carburetor-throat to cylinder-head brackets to
mount after-market air cleaners. Mounting hardware and replacement gasket included.
NOTE: 91-06 XL and 93-99 Big Twin models require a breather/mounting kit.
-289062 CV carb bracket for 88-06 XL Evolution M.S.L. $26.99
-289067 CV carb bracket for 91-99 Big Twin Evolution (Except Twin Cam) M.S.L. $26.99
-289080 Air cleaner/carb brace adapter for L78-84 FL,
FX Shovelhead.
Breather/Mounting Kit with KW Carb Bracket
-CCI #31-658 Fits 91-03 XL Evolution M.S.L. $69.95
-CCI #31-659 Fits 93-99 Big Twin Evolution (Except Twin Cam) M.S.L. $69.95
Dresser Bars for Softail®
Heavy gauge, 1"-diameter steel tubing.
Designed to fit with other KW accessories.
-190035 Front Dresser Bar, fits 86-99 FLST,
FLSTC, FLSTF M.S.L. $152.99
-190050B Rear Dresser Bar, fits 86-2008 FLST dresser. Replaces H-D 49261-00 and 49158-89D. Relocation kit H-D 90238-00 not required. Must use with Khrome Werks trailer hitch 720600C; pair M.S.L. $179.99
Replica Front Dresser Bars
-190025 Fits 58-E79 4-speed FL swingarm frames;
repl. #49038-58B M.S.L. $139.99
Warning: Dresser Bars are designed for aesthetics only. May provide limited leg and
cosmetic vehicle protection under special circumstances (tip-over while stopped, very
slow speed slide).
|