|
Khrome Werks High Performance Exhaust Systems
DUAL HEADER SYSTEMS
for 1993-2009 HARLEY-DAVIDSON FLHT, FLHX, FLTR AND FLHR models
New 2009-style exhaust headers for
1993-2009 Twin Cam baggers. Update your early Twin Cam bike and
enjoy the late model look. This cleaner looking system reduces heat
transmission to the rider and passenger by routing the exhaust under
the frame instead of under the seat. Significant increases in
horsepower and torque over OEM systems on 99-08 versions. Upgrade
your 2009 model to a true ‘True Dual’ look; lighter and better
looking. Both systems feature 1¾” 16 gauge mandrel
bent, interconnected headers and 220º full coverage heat shields.
Front pipe crosses over to the left side and is securely mounted to
the transmission oil pan. Crossover pipe is formed obround from 1
7/8” tubing for increased ground clearance and no cross sectional
area loss. 99-08 system crossover is slightly lower than frame cross
brace with the OEM kickstand as the lowest point. True Dual look
with a
hidden inter-connect for maximum top end horsepower, improved low
end torque and sound damping as well as balanced flow and sound. An independent dual pipe version was
tested with less favorable results. Early systems include two 18mm
O2 sensor ports and plugs while late systems include both 18mm and
12mm O2 sensors and plugs. Both systems include all mounting
hardware. Mufflers not included. Use
any Khrome Werks or other bagger muffler set. Made in USA
Exhaust header extension adapter kit available for
2009-12 Tri Glide trikes.
NOTE: Installation on 2010-2012 models eliminates the
factory-installed catalytic converter from the system.
- 200600A
2:2 Headers for 1993-2008
M.S.L. $525.00
Instructions for 200600
- 200650 2:2 Headers for 2009
M.S.L. $525.00
Instructions for 200650
- 200610 Exhaust header extension
adapter kit for Tri Glide See picture below. M.S.L. $79.95
Available: See cross
reference chart for a stocking distributor.
|
|
|
U.S. Patent 4,206,600
NOTE: Improve low and Mid-range performance with HP-Plus® Baffles.
|
|
AR®
2" Drag Racing Exhausts
- for
stock to big-inch motors. Full 2" diameter from flange to miter. Bologna cut style. Great upper mid-range and
top end performance. Awesome sound! Not for use on the street unless used
with HP+ 2" Baffles (improved low-end and mid-range performance as well as
significant noise reduction).
-One-piece construction. No welds to impede flow.
-Mandrel bends to ensure smoothest, most uniform bends possible.
-Precision fit. Designed, manufactured, tested, and inspected on
computer-aided equipment.
-Duplex nickel chrome plating for lasting finish.
-Patented "Anti-Reversionary®" (AR®) cone built into the header flanges for
improved
low- and mid-range torque without hindering top end performance.
-Dimpled at the flange for easy installation.
Covered by U.S. Patents 4,206,600 and 5,173,576 and patents pending. AR® and
HP-Plus® are registered trademarks of Fueling Engineering. Harley-Davidson,
Softail and Tour-Pak are registered trademarks of the Harley Davidson Motor
company, Incorporated. Harley-Davidson® motorcycle model designations are
used in this literature for reference only: FLT, FLST, FX, FXDL, FXDWG, FXR,
FXST, XL.
|
For XL Evolution (Right footpeg/brake assembly may need to be spaced outward on 1200 Customs). Does not fit 2004-up models.
Mounts to factory bracket. Must use KW heat shields.
-200195C Fits L87-03 XL M.S.L. $184.99
For Shovelhead
Includes hanger bracket.
-200170A Fits 71-84 FX; 80-82 FXWG (except 82-83 FXR, FXRS) M.S.L. $184.99
NOTE: These pipes are designed for use on closed course competition motorcycles only and do not conform to U.S. EPA noise emission standards.
Instructions for 200170A |
|
|
|
Full Coverage Heat Shields for Khrome Werks® AR®II and AR®III Exhaust Systems
Fits 1984-06 H-D SOFTAILS® models equipped with KHROME WERKS AR®II and AR®III exhaust systems. Full 180° coverage around the header pipe, from port to the start of the muffler body. Chrome plated, formed front and rear shields are specifically designed to fit our AR® 1 3/4" stagger dual exhaust systems, KW# 210280, 210380A, 210405A, 210430, 210710 and 210810. Comes with 6 narrow stainless band clamps. Made in the U.S.A. Currently available factory direct
-203140 pair. M.S.L. $124.99
|
|
Heat Shields for Khrome Werks™ Exhaust
Pre-95 style shields fit KW AR® 2" and AR® exhaust systems. Narrow hose clamps included.
-203095 For all AR® systems on 91-04 FXD Dyna Glide® M.S.L. $79.99
-203110 For all AR® systems on 86-03 XL Evolution M.S.L. $79.99 *NOTE: Fits AR® 2" Drag version 200195B and C only
-203120 For FXR Evolution with AR®II version 210385A or 210405A; AR® 2" Drag and AR® 100; Will not fit AR® or non-A version AR® II systems M.S.L. $79.99
Khrome Werks' products are distributed by Custom Chrome, Drag Specialties,
Biker's Choice/Tucker, and Zipper's. Cross-reference part number list
available on this website.
|
|
 
|