See "Handlebar Specifications" at the end of this section for illustrations of each specific model.
1 ¼” FAT HANDLEBARS, CHROME AND BLACK    

1 1/4"  Fat Ape Handlebars

1 ¼” FAT APE HANGER HANDLEBARS for 2008-13 ELECTRA GLIDE® and STREET GLIDE® models

Specially designed for the 2008-13 models with the electronic throttle control sensor unit. 1 ¼” diameter formed handlebars with 1” center mounting section and 1” grip mounts. 12” and 14” versions available. Pre-drilled for internal wiring; knurled for non-slip clamping. Work with standard controls and grips. Harley-Davidson offers a Twist Grip Sensor Kit, p/n 32310-08 with 29” longer wires to eliminate wire splicing of the sensor unit. Namz Custom Cycle Products Inc. offers wire extension kits as well. See “Handlebar Specifications” on our web site for more detailed dimensions. Made in USA.

- 300315   1 ¼” x 12” Ape Hanger M.S.L. $189.99
- 300317   1 ¼” x 14” Ape Hanger M.S.L. $199.99

See cross reference for a stocking distributor.

1 ¼” FAT APE HANGER HANDLEBARS for 1997-2007 ELECTRA GLIDE® and STREET GLIDE® models without electronic throttle control.

1 ¼” diameter formed handlebars with 1” center mounting section and 1” grip mounts. 12” and 14” versions available. Pre-drilled for internal wiring; knurled for non-slip clamping.  Note: Will not fit 2008-up models with electronic throttle control.

- 300310   1 1/4" x 12" Ape Hanger  M.S.L.  $189.99
- 300312   1 1/4" x 14" Ape Hanger  M.S.L.  $199.99

See cross reference for a stocking distributor.



1 ¼” FAT APE HANGER HANDLEBARS
 
for 2008-13 ROAD KING® and ROAD GLIDE® models
Specially designed for the 2008-13 models with the electronic throttle control sensor unit. 1 ¼” diameter formed handlebars with 1” center mounting section and 1” grip mounts. 12”, 14", and 16” versions available. Pre-drilled for internal wiring; knurled; clamping width is 5.5” to accommodate one piece top riser clamps. Work with standard controls and grips. Harley-Davidson offers a Twist Grip Sensor Kit, p/n 32310-08 with 29” longer wires to eliminate wire splicing of the sensor unit. Namz Custom Cycle Products Inc. offers wire extension kits as well. See “Handlebar Specifications” on our web site for more detailed dimensions. Made in USA.

-300325  1 ¼” x 12” Ape Hanger M.S.L. $174.95
-300326  1 ¼” x 14” Ape Hanger M.S.L. $179.95
-300327   1 ¼” x 16” Ape Hanger M.S.L. $184.95

for 1996-2013 models without electronic throttle control.
1 ¼” diameter formed handlebars with 1” center mounting section and 1” grip mounts. 12” and 16” versions available. Pre-drilled for internal wiring; knurled; clamping width is 5.5” to accommodate one piece top riser clamps. Work with standard controls and grips.  Fit any 1996-13 H-D model with 1" standard mounting section and standard risers on 3 1/2" centers.

Note: Will not fit FLHT, FLHX, or 2008-13 models with electronic throttle control.

-300320 
  1 1/4" x 12" Ape Hanger  M.S.L.  $174.95
-300322   1 1/4" x 16" Ape Hanger  M.S.L.  $184.95
 



Black 1 ¼” Fat Ape Hangers and Custom

 

- 300840  1¼” Fat Heritage-style black  M.S.L. $174.95

- 300832  1¼” x 12” Ape w/ETC  M.S.L. $174.95

- 300834  1 ¼” x 14” Ape w/ETC  M.S.L. $179.95
- 300833  1¼” x 16” Ape w/ETC  M.S.L. $184.95

- 300830  1¼” x 12” Bagger Ape w/ETC  M.S.L. $189.99
- 300831  1¼” x 14” Bagger Ape w/ETC  M.S.L. $199.99

 

1 ¼” FAT HERITAGE STYLE HANDLEBAR
for 1996-13 H-D models

 

We offer the popular and comfortable heritage style handlebar now in a brawny 1¼” diameter with 1” center mounting section and 1” grip mounts. Polished, chrome plated or gloss black. Pre-drilled for internal wiring and notched for ETC on 2008-up Road King and Road Glide models; knurled; clamping width is 5.5” to accommodate one piece top riser clamps. Work with standard controls and grips. Some models may require ETC wire extensions. See “Handlebar Specifications” on our web site for more detailed dimensions. Made in USA.

- 300330  1¼” Fat Heritage-style chrome    M.S.L. $174.95
- 300840  1¼” Fat Heritage-style black   M.S.L. $174.95  
      

 

1" Heritage Apes

1” HANDLEBARS for 1982-2013 H-D models,
pre-drilled and notched
for Electronic Throttle Control

Four of our most popular 1” custom handlebars are now available notched for ETC on 2008-up Road King and Road Glide models and dimpled and drilled for internal wiring for pre-2008 models. Knurled for non-slip clamping. Work with standard controls and grips. Polished and chrome plated or gloss black. See “Handlebar Specifications” on our web site for more detailed dimensions. Made in USA.

- 300045  1” x 16” Ape w/ETC chrome M.S.L. $83.99

- 300822  1” x 16” Ape w/ETC black M.S.L. $83.99

- 300008  1” x 14” Ape w/ETC chrome M.S.L. $81.49

- 300808  1” x 14” Ape w/ETC black M.S.L. $81.49

- 300044  1" x 12” Ape w/ETC chrome M.S.L.  $78.99

- 300821  1” x 12” Ape w/ETC black M.S.L.  $78.99

- 300043  Stretch Heritage style chrome  (2 inches taller than 300042) M.S.L. $78.99

- 300042  Heritage style w/ETC chrome M.S.L. $74.99

- 300804  Heritage style w/ETC black M.S.L. $74.99




 



1” APE HANGER BARS for 2008-13 Electra Glide®
and Street Glide® models with Electronic Throttle Control

1” diameter formed handlebars. 12” and 14” versions available. Pre-drilled for internal wiring and the electronic throttle control sensor unit; knurled for non-slip clamping, Work with standard controls and grips. Polished and chrome plated or gloss black. See “Handlebar Specifications” on our web site for more details. Made in USA.

- 300025  1” x 12” Ape w/ETC chrome  M.S.L. $94.99
- 300824  1” x 12” Ape w/ETC black  M.S.L. $94.99
- 300026  1” x 14” Ape w/ETC chrome  M.S.L.  $97.49
- 300825  1” x 14” Ape w/ETC black  M.S.L. $97.49

 

“SWEEPER” CUSTOM HANDLEBARS

1" Sweeper Stretch Handlebars
 
1" diameter, 14-gauge steel tubing. Features all new swept back 10" radius rise section. Narrow, wide and special wide versions for FLHT available. Wide version (2 models) fits Softails, Softail Springers, Dyna Wide Glides, Road Kings. All are Diamond knurled for H-D OEM risers on 3 1/2" centers (4 3/4" for Springers) to help prevent slippage. With wire dimples. FLST, FLHR and FLHT (except +2 FLHT) use all stock cables and brake hose.
Note: Will not fit 2008-up models with electronic throttle control.

-300500  1" Narrow Sweeper Bar M.S.L. $75.99
-300501  1" Wide Sweeper Bar M.S.L. $75.99
-300504  1" +2" Taller Wide Sweeper Bar M.S.L. $75.99
-300503  1" Wide Sweeper Bar for Springers M.S.L. $75.99
-300502  1" Sweeper Bar for 1996-2007 FLHT M.S.L. $75.99
-300505  1" +2 Taller Sweeper Bar for 1996-2007 FLHT M.S.L. $75.99 (Requires 3" over clutch cable).




WIDE “SWEEPER” CUSTOM HANDLEBARS for 2008-13 ELECTRA GLIDE® ROAD KING® and ROAD GLIDE® models

Our latest additions to the Sweeper family. Similar to our p/n 300501 and 300504 Wide Sweeper Bars, except the throttle grip end is notched and the bar in milled for internal wiring to accommodate the new electronic throttle control sensor unit on 2008-13 models. Formed from 1” diameter, 14 gage steel tubing, dimpled, knurled and duplex nickel chrome plated. Version for 2008-12 Road Kings and Road Glides measures 33” grip to grip with 8” of straight section between the lower bends. Version for Electra Glides is 34” grip to grip with 12” center straight section.  Both versions also available +2 – two inches longer than standard Sweeper. Both versions available 2+2 – two inches longer and two inches taller than standard Sweeper. +2 Sweepers on Electra Glide models requires longer clutch cable, OEM #38649-98 for 1996-2006, OEM #38649-07 for 2007, OEM #38649-08 for 2008-up.  Cable changes may be required. Wire extension for the ETC may or may not be needed. Harley- Davidson offers a Twist Grip Sensor Kit, p/n 32310-08 with 29” longer wires to eliminate wire splicing of the sensor unit. Namz Custom Cycle Products Inc. offers wire extension kits as well. See “Handlebar Specifications” on our web site for more detailed dimensions. Made in USA.

-300511  Wide Sweeper f/08-13 FLHR, FLTR   M.S.L. $89.99

-300512  Wide Sweeper f/08-13 FLHT   M.S.L. $89.99

-300514  +2 Wide Sweeper f/08-13 FLHR, FLTR   M.S.L. $89.99

-300516   2+2 Wide Sweeper f/08-13 FLHR, FLTR  M.S.L. $94.99

-300515  +2 Wide Sweeper f/08-13 FLHT M.S.L. $89.99

-300517   2+2 Wide Sweeper f/08-13 FLHT  M.S.L. $94.99

 


Black Sweeper Style

 

- 300810  1” Wide Sweeper, +2” tall for 2008-13 FLHR, FLTR M.S.L. $89.99
- 300812  1” Wide Sweeper, 2+2 for 2008-13 FLHR, FLTR   M.S.L. $94.99
- 300811  1” Bagger Sweeper, +2” tall for 2008-13 FLHT, FLHX  M.S.L. $89.99
- 300813  1” Bagger Sweeper, 2+2 for 2008-13 FLHT, FLHX  M.S.L. $94.99
 

1" APE HANGER HANDLEBARS

 

1" "Ape Hanger" Custom Handlebars
1" diameter, 14-gauge steel tubing. Diamond-knurled for OEM risers on 3-1/2" centers (4 1/2" for springers) to help prevent slippage. 82-up models feature wire dimples.

Note; Not for 2008 and newer models with electronic throttle control.


-300036   Mini-Ape Hanger for FXDWG,10" rise M.S.L. $62.99
-300051   Mini-Ape for FXDWG,10" rise, drilled M.S.L. $73.99
-300016   Narrow Ape bar, 12" rise 82-up H-D M.S.L. $62.99
-300017   Narrow Ape bar, 16” rise 82-up H-D, drilled  M.S.L. $78.99
-300010A  Ape Hanger bar, 12" rise pre-82 H-D M.S.L. $59.99
-300012    Ape Hanger bar, 12" rise 82-up H-D M.S.L. $64.99
-300015   Ape Hanger for H-D Springer, 12" rise L88-05 M.S.L. $64.99
-300011A  Ape Hanger bar, 16" rise pre-82 H-D M.S.L. $64.99
-300013    Ape Hanger bar, 16" rise 82-up H-D M.S.L. $69.99
-300018   Ape Hanger for H-D Springer, 16" rise L88-05 M.S.L. $67.99
-300021   Ape Hanger bar, 18" rise pre-82 H-D M.S.L. $76.99
-300023   Ape Hanger bar, 18" rise 82-up H-D M.S.L. $78.99



1" Black  Ape Hangers

 

- 300820  1” x 10” Mini Ape, drilled  M.S.L. $73.99

- 300823  1” x 12” Narrow Ape, drilled  M.S.L. $73.99

- 300826  1” x 16” Narrow Ape, drilled  M.S.L. $78.99
- 300821  1” x 12” Ape w/ETC M.S.L. $78.99

- 300808  1” x 14” Ape w/ETC M.S.L. $81.49
- 300822  1” x 16” Ape w/ETC  M.S.L. $83.99
- 300824  1” x 12” Bagger Ape w/ETC  M.S.L. $94.99
- 300825  1” x 14” Bagger Ape w/ETC  M.S.L. $97.49

 

 

1" CUSTOM AND REPLACEMENT HANDLEBARS
 
1" Chrome Drag Bars
 
1" diameter, 14-gauge steel tubing. Diamond-knurled for OEM risers on 3-1/2" centers to help prevent slippage. 82-up models feature wire dimples.

-300920  Standard drag bar (no knurls, fits 73-81 H-D M.S.L. $44.99
-300925  Standard drag bar, fits 82 and up H-D M.S.L. $53.99
-300915  Low-rise drag bar, fits 82and up H-D M.S.L. $57.99
1" Chrome Custom Replacement Handlebars
1"-diameter, 14-gauge steel tubing. Diamond knurled for OEM risers on 3 1/2" centers (except for Deuce and Springers) to help prevent slippage. All with wire dimples.

-300035 Replaces OEM #56082-83. Fits 86-up 883, 83-85 XLS, 87 FXRS, 91 FXDB-S M.S.L. $54.99
-300037  Replaces #56094-95 Bad Boy 82-up H-D Fits 95-97 FXSTSB M.S.L. $59.99
-300067  Bad Boy style for 82-up H-D M.S.L. $59.99
-300071  Stretch Bad Boy style for 82-up H-D M.S.L. $59.99

1" Chrome Custom Replacement Handlebars

1"-diameter, 14-gauge steel tubing. Diamond knurled for OEM risers on 3 1/2" centers (4 1/2" for springers) to help prevent slippage. 82-up models feature wire dimples.

Note: Will not fit 2008 and later models with electronic throttle control.

-300032  Replaces OEM #56569-86, Fits 87-up FLST Heritage M.S.L. $59.99
-300072  Tall Heritage style for Road King M.S.L. $62.99



1" Black Traditional Styles

 

- 300802  1” Drag bar  M.S.L. $53.99

- 300800 1” XLS style drag bar  M.S.L. $54.99

- 300801  1” Low Rise drag bar  M.S.L. $57.99

- 300803  1” Bad boy style for 3 ½” riser center models  M.S.L. $59.99

- 300804  1” Heritage style w/ETC black  M.S.L. $74.99

 

 

1" Chrome Glide Handlebars

 1"-diameter, 14-gauge steel tubing. Diamond knurled for OEM risers on 3 1/2" centers (4 1/2" for springers) to help prevent slippage. 82-up models feature wire dimples.

-300055  Glide-style, fits 73-81 H-D M.S.L. $57.99
-300053  Glide-style with dimples, fits L88-05 FXSTS; 95-97 FXSTSB M.S.L. $59.99
-300060  Glide-style with dimples, fits 82-up H-D M.S.L. $59.99
-300038  Replaces #55933-97 fits 97-03 FLSTS Heritage springer M.S.L. $59.99
-300034  Fatboy-style,
replaces #55919-82

              fits 90-00 FLSTF,N; 82-84 FLH; 94-07 FLHR M.S.L. $59.99
-300069  Fatboy-style, fits 73-81 H-D M.S.L. $57.99

1" Chrome Buckhorn Handlebars


1"-diameter, 14-gauge steel tubing. Diamond knurled for OEM risers on 3 1/2" centers (4 1/2" for springers) to help prevent slippage. 82-up models feature wire dimples.

-300007A  Replaces OEM #56081-82.Fits 82-05 XL, FX, FXR, FXST, FXDB, Buckhorn M.S.L. $59.99
-300033   Replaces OEM #56093-88 Fits L88-05 FXSTS Springer M.S.L. $59.99
-300065    Hi-Rise Buckhorn Pullback, fit 82-up H-D M.S.L. $62.99


1" T-Bars 27-1/2" wide  
          
Lightweight, strong, comfortable. 1" diameter. Late models with wire dimples. Made in the USA.

Note: Not for 2008 and newer models with electronic throttle control.

-300084  Pullback T-Bar, 6" rise 82-up M.S.L. $99.99
-300085  Pullback T-Bar, 8" rise 82-up M.S.L. $99.99
 



HANDLEBAR SPECIFICATION CHARTS

Back to Top     Main Products Menu