Khrome Werks

Chrome Rear Exhaust Mounting Bracket for FXD
Rear Exhaust Mounting Bracket, replaces H-D #65695-95. Constructed from 7-gauge steel plate, highly polished and double nickel chrome plated. A chrome dress up complement to our Muffler support #209953 on 95-05 Dyna Glide models. Can be used to convert Dynas modified with custom exhausts back to staggered duals. Upgrade pre-95 models along hardware from H-D to provide stronger rear pipe support. Made in U.S.A.
(M.S.L. $35.95)
-209975 Closeout price $17.99

Die-Cast Turn Signal Visor for FLT, FLST, FXRT
Chrome plated die cast zinc visor for the turn signals on 1986-up FLT, FLST and FXRT Harley models. Mounts between the OEM light housing and the lens; O-rings provided to seal out water, dust, etc. Longer screws provded; sold in pairs. Made in Taiwan.
-720095 Turn signal visor (pr.) $11.49 (M.S.L. $22.99)

1" Stretch T-Bar

1" Stretch T-Bar
This addition to our line of Pullback Drag Bars stretches almost 2-1/2" closer to the rider than our standard 1" x 8" Pullback Drag Bar. Controls clear the gas tank on most 1982-up Harley-Davidson models. Bar is manufactured from 1.00" O.D. x 12 gage steel tubing. Risers are 1" O.D. x .120" DOM tubing with 1/2"-13 threaded inserts. Polished and nickel chrome plated. Bars are 27-1/2" wide with 11-1/8" pullback from the triple tree to the end of the grip when the fork angle is 30°. Note: Turn signals must be relocated to the fork legs. Made in U.S.A. Currently available factory direct.

-300090 Stretch Drag T-Bar Closeout price $61.99 (M.S.L. $102.99)

1" Low Rise T-Bars — 27-1/2" wide

1" Low Rise T-Bars — 27-1/2" wide

Lightweight, strong, comfortable. 1" diameter. Late models with wire dimples. Available Factory Direct

-300115 Low Rise T-Bar, 82-up Closeout price $68.99 (M.S.L. $114.99)
-300125 Low Rise Stretch T-Bar, 82-up Closeout price $68.99 (M.S.L. $114.99)

Other Handlebars:

300086.. 1” x 4” Pullback T bar, drilled. For H-D models with triple tree clamps on 3 ½” centers. Dimpled for late model wiring controls. Threaded for use with ½”-13 Grade 8 bolts. 27 ½” wide. Same height as H-D stock pullback riser. Features drilled wire routing holes in the bar and risers. (14) ……….$64.99 (LIST $108.99)

300345.. 1 ¼” x 4” Pullback T bar, drilled. “Beefy” T-bars. One-piece, 1 ¼” diameter section tapers to 1” for standard handlebar controls. Dimpled and drilled for wiring. For H-D models with triple tree clamps on 3 ½” centers. Threaded for use with ½”-13 Grade 8 bolts. 27 ½” wide. Same height as H-D stock pullback riser. (6) …….. $99.99 (LIST $169.99)

SISSY BARS / PADS:

263615..7.38” Round Sissy Bar Upright. Fits 1957-78 XL with KW side plates (12)……..$32.50 (LIST $64.99)

Wide pads designed specifically for Softail and Road King H-D models with lowboy or mini lowboy uprights. 8 ½” tall x 9 ½” wide with 2” padding. Chrome bracket included.

265537.. Wide pad, chrome studs (3) …….. $49.99 (LIST $74.99)

265538.. Wide pad, plain (16) ……… $49.99 (LIST $74.99)

265562.. Bantam™ Sissy Bar Pad with black studs. Designed to fit KW Bantam sissy bar uprights. 4 ¾” tall x 7” wide. Chrome bracket included. (9) ………$39.99 (LIST $59.99)

OTHER ACCESSORIES:

720025…Saddlebag Top Rails for 1982-up FLT, FLHT, ULTRA. Chrome plated rails, contoured to fit the tops of saddlebags. They curve around the top front of the bag lid to provide additional protection from scratches and nicks. Pair (17) …… $44.99 (LIST $69.99)

FOR GOLD WING:

1 1/4" Square Receiver Trailer Hitch
for 1988-2000 Honda Gold Wing GL1500

Popular automotive-style 1 1/4" receiver hitch attractively designed to complement the 1988-2000 Honda Gold Wing 1500. Hitch mounts to frame and saddlebag sub-frame providing both horizontal and vertical support. Hitch features high gloss black powder paint finish and provisions for safety chains. Built in mudflap bracket. Removable polished chrome tongue is held in place by a 1/2" hitch pin and clip. Hitch includes all mounting hardware and a 1 7/8" chrome plated ball. Made in USA.

- 708160A 1 1/4" Square Receiver Trailer Hitch M.S.L. $100.00

NOTE: We are aware of no current state or federal guidelines for pulling a trailer with a motorcycle. We suggest when pulling and loading a trailer do not exceed the motorcycle manufacturer's Gross Vehicle Weight limits. For all-around best handling of motorcycle, tongue weight should be 10% of the gross weight of the trailer, but maximum tongue weight cannot exceed 40 lb. Gross weight includes weight of trailer and all of its contents, not to exceed 400 lb.

FOR YAMAHA:

SLIP-ON MUFFLERS for 1999-2004 ROAD STAR™ and ROAD STAR™ SILVERADO V1600. Also fit 2005-06 V1700 models.
BOLOGNA STYLE

680870A Bologna..... $100.00 (LIST $325.00)